HK Audio Lucas nano 600 Manual De Instrucciones página 7

3 Setups
LUCAS NANO 600 ADD-ON sets afford you the greatest flexibility when
it comes to configuration. These are sold separately.
1. LUCAS NANO 600 MONO STAND ADD-ON
Contains one each two-piece speaker pole, stand adapter, speaker cord and bag
2. LUCAS NANO 600 STEREO STAND ADD-ON
Contains two each adjustable speaker tripods and speaker cords, plus one bag
3. LUCAS NANO POLE MOUNT ADAPTER
Contains two adapters for speaker stands with a diameter of 35 mm
4. LUCAS NANO DOUBLE STEREO CABLE
Contains one stereo cord with 1/4" (6.3 mm) jack plugs to connect LUCAS NANO 600s
5. LUCAS NANO 600 ROLLER BAG
Contains one padded trolley
6. LUCAS NANO 600 DESK / WALL MOUNT
Contains two each wall / tabletop mounts, cords and 1/4" (6.3 mm) speaker plug adapters
You can use LUCAS NANO 600 in various configurations.
The following examples should help you to find the best setup for
your application:
3.1 Mono System 1
Stack and secure the LUCAS NANO 600 satellites as described in
section 1.3, Easy Click Connector, for operation in Twin mode. To
connect the pair of satellites to the subwoofer, hold them upright as you
lower and insert them into the shaft and then push forward. Be sure to
set the Setup switch to Twin.
3.2 Mono System 2
Stack and secure the LUCAS NANO 600 satellites as described in
section 1.3, Easy Click Connector, for operation in Twin mode. Screw
the M20 threading on the lower end of the speaker extension pole
(ø 35 mm) into the mounting plate on top of the subwoofer. Place the
pole mount adapter 2 on the speaker extension pole and secure the
pair of satellites on the mounting plate by engaging the Easy Click
connector. To do this, hold the pair of satellites upright, insert them in
the shaft and then push forward. Use an speaker cord
compatible plugs to connect the LUCAS NANO 600 subwoofer's
Speaker Out to Satellite L to the pair of satellites. Be sure to set the
Setup switch to Twin.
3.3 Stereo System
Attach each of the two LUCAS NANO 600 satellites to a tripod
speaker extension pole with an 3/8" threaded tip. Use optional
cords with Speakon-compatible plugs to connect the subwoofer's
Speaker Out to Satellite L output to the left satellite. Then connect the
Speaker Out to Satellite R output to the right satellite. Be sure to set the
Setup switch to Single mode.
3.4 Double Stereo System
(Two LUCAS NANO 600 Systems)
Stack and secure the LUCAS NANO 600 satellites as described in
section 1.3, Easy Click Connector, for operation in Twin mode. Then
screw an M20 speaker pole
subwoofer and attach two satellites to each pole. Attach the pole mount
3
adapter
to the mounting plate by engaging the Easy Click connector. To do this,
hold the pair of satellites upright, insert them in the shaft and then push
forward. Use an speaker cord
to connect the subwoofers' Speaker Out to Satellite L outputs to the
pairs of satellites. Be sure to set the Setup switch to Twin.
You can use both mixing consoles simultaneously when operating two
LUCAS NANO 600s as a double stereo set as shown in the DJ and
Band + Recording examples on page 62 of the appendix. This increases
the overall system's input channel count to six, the signals of which are
rendered in stereo.
Use a cord
the two LUCAS NANO 600 subwoofers' Link In/Out ports and configure
a double stereo system. Be sure to set the subwoofers' Balance knobs
accordingly: Turn the left sub's knob to the left and the right sub's to the
right.
You'll find examples of more applications with two combined LUCAS
NANO 600 systems, for example, to cover two rooms, in the appendix
starting on page 58.
1
) Part of the optional LUCAS NANO 600 MONO STAND ADD-ON
2
) Part of the optional LUCAS NANO 600 MONO STAND ADD-ON and the LUCAS NANO POLE MOUNT
1
ADAPTER set
3
) Part of the optional LUCAS NANO 600 STEREO STAND ADD-ON
4
) Part of the optional LUCAS NANO DOUBLE STEREO CABLE set
1
with Speakon-
Lucas Nano 600
1
into the pole mount on top of each
to the speaker extension pole and secure each pair of satellites
1
equipped with Speakon-compatible plugs
4 equipped with stereo 1/4" (6.3 mm) jack plugs to connect
1.0
3 using a
3
speaker
7