Product Description - Ingun MA Serie Manual Del Usuario

Radio frequency replacement kit
2.1) Additional functions (options)
The optionally available additional functions allow the manual test adapter to be retrofitted by the
user and also enable the functionality of the test adapter to be extended individually. The addition-
al functions are supplied with an assembly drawing which details the data relevant for installation
and commissioning.
The following figure shows a small selection of additional functions that can be added subsequent-
ly:
Additional functions for the test adapter
2.2)

Product description

A rating plate is attached to the test fixture and the replacement kit. A CE label is affixed only if
the test fixture and the replacement kit are to be treated in the above configuration according to
an applicable EU Directive.
WARNING L
ETHAL ELECTRIC SHOCK
Deadly electrical voltage at the test probes for > 25 VAC voltage and > 60 VDC voltage!
Replacement kits must not be used in the test fixture if the kit's rating plate specifies a

higher voltage than that given on the rating plate for the test fixture.
21
!
©
INGUN: Subject to technical changes without notice. E&OE.
1) Stacking screw
2) Pressure frame unit
(NDH)
3) Collar screw for pressure
plate
4) Pressure plate (ADP)
5) Radio frequency seal
(copper-beryllium alloy
wire mesh)
6) Probe plate unit (KTE)
1) Self-opening unit
2) Closed" lock
3) 2-stage kit
4) Open" lock
5) Safety switch
English