Publicidad
Idiomas disponibles
Idiomas disponibles
6.3)
Closing the drive unit
1) Open the drive unit as far as it will go
4) Close the quick lock with a Phillips-head
screwdriver
6) Put the knurled-head screws back into the
park position
6.4)
Testing
1) Insert the electronics assembly to be tested, checking it is aligned properly
2) Use the operating handle to close the test fixture
29
2) Close the drive unit as far as the anti-
pinch protection
3) Enable the anti-pinch protection and close
the drive unit completely
5) Unscrew the drive lock's knurled-head
screws
©
INGUN: Subject to technical changes without notice. E&OE.
English
Publicidad
Capítulos
