Elma ARIES 32 Manual Del Usuario página 34

4.1.2. Assembling the head
1. If the head is joined to the gear motor, unplug the socket from the
power source.
2. Fit the propeller (Figure 6 point 1) to the gear motor's output axis
(Figure 5 point 2).
3. Proceed to place the blade (Figure 6 point 2) and the plate
(Figure 6 point 3).
4. Screw the ring (Figure 6 point 4) on the headstock body.
In a way that all the accesories of the headstock body will be fixed.
Figure 6.
5. To finish, place the Tray over the Inlet mouth, supporting the feet on
the Gear motor´s box (Figure 7 point 1).
6. The mincing machine is ready for use.
34