Technical Data - Migatronic SIGMA SELECT 300 Guía De Usuario

Technical data

POWER SOURCE SIGMA Select
Mains voltage ±15% (50-60Hz), V
- Autotransformer (optional) ±15% (50-60Hz), V
Minimum generator size, kVA
Minimum short-circuit power, MVA
1)
Fuse, A
Mains current, effective, A
Mains current, max., A
Power, 100%, kVA
Power, max., kVA
Power, open circuit, W
Efficiency
Power factor
Current range, A
Duty cycle, 100% 20°C (MIG), A
Duty cycle, max. 20°C (MIG), A/%
Duty cycle, 100% 40°C (MIG), A/V
Duty cycle, 60% 40°C (MIG), A/V
Duty cycle, max. 40°C (MIG), A/%/V
Open circuit voltage, V
2) Sphere of application, C
2) Sphere of application, S
3) Protection class
Standards, C
Standards, S
Dimensions C (HxWxL), mm
Dimensions S (HxWxL), mm
Weight C, kg
Weight S, kg
WIRE FEED UNIT MWF 30
Wire feed speed, m/min 0.5-30.0
Torch connection EURO
Wire-reel diameter, mm 300
Wire spool, kg 5-18
Duty cycle, 100 % 40°C, A/% 430
Duty cycle, 60% 40°C, A/% 500
Duty cycle, max. 40°C, A/% 550/50
3) Protection class IP23
Wire diameter, mm 0.6-1.6
Gas pressure, MPa (bar) 0.6 (6.0)
Dimensions (HxWxL), mm 413x310x750
Weight, kg 11.6
Standards IEC60974-5.
IEC60974-10 CL. A
1) This equipment complies with IEC 61000-3-12 provided that the short-circuit power Ssc of the grid at the interface point is greater than or equal to the stated data
in the abovementioned table. It is the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if
necessary, that the equipment is connected only to a supply with a short-circuit power Ssc greater than or equal to the stated data in the abovementioned table.
2) S This machine meets the demand made for machines which are to operate in areas with increased hazard of electric chocks.
3) Equipment marked IP23/IP23S is designed for indoor and outdoor applications.
300 300 IAC
3x400 3x400
16 19
TBD 4.3
16 16
11.0 16
15.4 18.3
9.0 11.1
10.7 12.7
30 30
0.85 0.85
0.90 0.90
MIG MMA MIG
15-300 15-250 15-300
290/28.5 250/30 300/29
220/25 220/28.8 270/27.5
240/26 230/29.2
300/25/29 250/40/30 300/80/29.0 300/80/32.0 400/50/34.0 400/45/36.0 400/40/34
50-60 65-70
S/CE S/CE
S/CE S/CE
IP23S IP23
700x260x735 700x260x735
454x260x735 454x260x735
36.9 53
26 36
COOLING UNIT MCU 1300
Cooling efficiency (1 l/min), W
Cooling efficiency (1.5 l/min), W
Tank capacity, liter
Flow, bar - °C - l/min
Pressure max., bar
Standards
Dimension s (HxWxL), mm
Weight
400
3x400
27
6.0
20
17.5
26.0
12.1
18.0
30
0.85
0.90
MMA MIG MMA
15-300 15-400 15-400
300/32 345/31.5 345/33.8
400/65/34.0
270/30.8 300/29 300/32.0
370/32.5
65-70
S/CE
S/CE
IP23
IEC60974-1. IEC60974-5. IEC60974-10 Cl. A
IEC60974-1. IEC60974-10 Cl. A
700x260x735
454x260x735
52
35
1300
1600
5
3.0 - 60 - 1.5
5
IEC60974-2.
IEC60974-10 CL.A
207x260x680
20
400 IAC 550
3x400 3x400
29 40
6.0 9.5
20 35
16.5 27.2
28.2 39.2
11.4 18.9
19.5 27.1
30 30
0.8 0.90
0.90 0.90
MIG MMA MIG
15-400 15-400 15-550
310/29.5 310/32.5 475/37.8
400/60/34 550/60/41.5 550/60/42.0
280/28.0 280/31.2 430/35.5
350/31.5 350/34 510/39.5
400/40/36.0 550/50/41.5 550/50/42.0
65-70 75-80
S/CE S/CE
S/CE S/CE
IP23 IP23
700x260x735 700x260x735
454x260x735 454x260x735
53 53
36
MMA
15 - 550
475/39.0
430/37.2
510/40.4
29