Technical Data; Fault Symbols - Migatronic FOCUS MIG 130 PFC Guía De Usuario

Connection and operation
Change of wire liner
Switch on, press, weld
Welding program setting
• Switch on the welding machine on the main switch
(2)
• Set the wire feed
speed and voltage
• The machine is now
ready to weld
WARNING
Voltage is present on the welding
wire when pressing the welding
hose trigger.

Fault symbols

Temperature error
The indicator flashes, when the power source is
overheated.
Leave the machine on until the built-in fan has cooled
it down.
Static characteristic
Static Characteristic
80
70
60
50
40
30
20
10
0
0 40 80 120
6
FOCUS MIG 130
PFC
5
4 6
V
3 7
2 8 Min. Max.
Focus MIG 130
PFC
MIG Load line
I2 [A]
160

Technical data

Power source
Mains voltage ±15% (50Hz-60Hz), V
Fuse, A
Mains current effective, A
Mains current max., A
Power (100%), kVA
Power max., kVA
Power, open circuit, W
Efficiency
Power faktor
Current range, A
Duty cycle, 100% at 20°C, A/V
Duty cycle, 100% at 40°C, A/V
Duty cycle, 60% at 40°C, A/V
Duty cycle, max. at 40°C, A/%/V
Open circuit voltage, V
Sphere of application
1)
Protection class
2)
Standards
Dimensions (HxWxL), mm
Weight, kg
EC DECLARATION OF CONFORMITY
MIGATRONIC A/S
Aggersundvej 33
9690 Fjerritslev
Denmark
hereby declare that our machine as stated below
Type: FOCUS MIG 130
PFC
As of week 45, 2014
conforms to directives 2006/95/EC
2004/108/EC
2011/65/EU
European standards: EN/IEC60974-1
EN/IEC60974-5
EN/IEC60974-10 (Class A)
Issued in Fjerritslev on 3 November 2014.
Anders Hjarnø Jørgensen
CEO
1) S This machine meets the demand made for machines which are to operate in areas
with increased hazard of electric chocks
2) Equipment marked IP23S is designed for indoor and outdoor applications
FOCUS MIG 130
PFC
230
16
8.8
15.0
1.8
3.5
40
0.8
0.99
45-130
130/20.5
70/17.5
100/19.0
130/25/20.5
85
S/CE
IP23S
EN/IEC60974-1.
EN/IEC60974-5.
EN/IEC60974-10
370x230x450
13