Operating And Status Indicators; Mounting; Electrical Installation - SICK HTF18 Instrucciones De Operación

4

OPERATING AND STATUS INDICATORS

4 Operating and status indicators
5

Mounting

6

Electrical installation

6
2 1 3
2
3
4
Mount the sensor using a suitable mounting bracket (see the SICK range of acces‐
sories).
NOTE
Note the sensor's maximum permissible tightening torque of 0.56 Nm.
The sensors must be connected in a voltage-free state (U
tion must be observed depending on the connection type:
– Plug connection: pin assignment
– Cable: wire color
Only apply voltage/switch on the voltage supply (U
tions have been established.
The green LED indicator on the top of the sensor lights up.
Explanation of connection terminology used in Tables 1-3:
BN = Brown
WH = White
BU = Blue
BK = Black
n. c. = no connection
Q1 = switching output 1
Potentiometer adjustment (if selec‐
1
tred by model configuration) or LED
Indicators
LED indicator green: supply voltage
2
active
LED indicator yellow: status of
3
received light beam
Signal strength light bar (if selected
4
by model configuration)
= 0 V). The following informa‐
V
> 0 V) once all electrical connec‐
V
Subject to change without notice
8017858.16K9 | SICK