Hazard Warnings And Operational Safety; Repairs - SICK PowerProx Micro WTT2SL Instrucciones De Operación

2.6

Hazard warnings and operational safety

2.7

Repairs

8021879.ZZG2 | SICK
Subject to change without notice
Instructed personnel have been briefed by the operating entity about the tasks
■
assigned to them and about potential dangers arising from improper action.
Skilled personnel have the specialist training, skills, and experience, as well as
■
knowledge of the relevant regulations, to be able to perform tasks assigned to
them and to detect and avoid any potential dangers independently.
Electricians have the specialist training, skills, and experience, as well as knowl‐
■
edge of the relevant standards and provisions to be able to carry out work on elec‐
trical systems and to detect and avoid any potential dangers independently. In Ger‐
many, electricians must meet the specifications of the BGV A3 Work Safety Regu‐
lations (e.g., Master Electrician). Other relevant regulations applicable in other
countries must be observed.
The following qualifications are required for various activities:
Tasks
Mounting, maintenance
Electrical installation,
device replacement
Commissioning,
Configuration
Operation of the device for
the specific application
Please observe the safety notes and the warnings listed here and in other chapters of
these operating instructions to reduce the possibility of risks to health and avoid dan‐
gerous situations.
The product is a replacement device. The device is not intended to be repaired. Interfer‐
ence with or modifications to the device on the part of the customer will invalidate any
warranty claims against SICK AG.
Qualification
Basic practical technical training
■
Knowledge of the current safety regulations in the workplace
■
Practical electrical training
■
Knowledge of current electrical safety regulations
■
Knowledge of the operation and control of the devices in
■
their particular application
Basic knowledge of the design and setup of the described
■
connections and interfaces
Basic knowledge of data transmission
■
Knowledge of the operation and control of the devices in
■
their particular application
Knowledge of the operation and control of the devices in
■
their particular application
Knowledge of the software and hardware environment in the
■
application
SAFETY INFORMATION
2
9