SICK WT100-2 Instrucciones De Operación página 4

Commissioning
Image 3: E
5
Sensor with potentiometer:
The sensitivity (sensing range) is adjusted with the potentiometer (type: 270°). Clockwise
rotation: sensitivity (sensing range) increased; counterclockwise rotation: sensitivity (sensing
range) reduced. We recommend placing the switching state in the object, e.g., see Graphic
F. Once the sensitivity has been adjusted, the object is removed from the path of the beam.
The switching output changes (see Graphic C).
The sensor is adjusted and ready for operation. Refer to Graphics C and G to check the func‐
tion. If the switching output fails to behave in accordance with Graphic C, check application
conditions. See section Fault diagnosis.
Image 4: C
8017530 | SICK
3