Publicidad
ti7561a
Pressure Control Installation
14
Connect display connector to
motor control board.
Pose du système de contrôle de la pression
14
Brancher le connecteur de
l'afficheur sur la carte de
commande moteur.
Instalación del dispositivo de control de presión
14
Enchufe el conector de la
pantalla de visualización a la
tarjeta de circuito impreso de
control del motor.
Installazione del controllo di pressione
14
Collegare il connettore del
display alla scheda di
controllo del motore.
De drukregelaar installeren
14
Sluit de stekker van
de display aan op de
besturingskaart van
de motor.
TO PLACE AN ORDER, contact your Graco distributor, or call 1-800-690-2894 to identify the nearest distributor.
All written and visual data contained in this document reflects the latest product information available at the time of publication.
This manual contains English, French, Spanish, Italian and Dutch; mm 311421
10
15
Install cover with four
screws.
15
Fixer le capot à l'aide
des quatre vis.
15
Instale la cubierta con
los cuatro tornillos.
15
Installare il coperchio con
le quattro viti.
15
Bevestig het deksel met vier
schroeven.
Graco reserves the right to make changes at any time without notice.
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441
www.graco.com
6/2006, Audited 2/2006
311514A
Publicidad
