CLAS OP 3221 Manual De Instrucciones página 6

OP 3221
DESCRIPTION
The reinforced pneumatic spring compressor is made up of a painted metal tubular frame. On this structure is
mounted a pneumatic piston fixed at the frame, its extension and compression allows the compression and the
release of the spring held by control brackets.
The machine is a device for assembling and dissasembling the shock absorbers of the cars. Every different use is
considered improper and illogical. The manufacturer does not assume responsibility for possible damage caused
by noncompliance with instructions.
CHARACTERISTICS
Air pressure
min. 6 bar – Max. 10 bar
Power
10 bar=2.452 Kg
Cylinder stroke 330 mm
Packaging
520x300x1600 mm
dimensions
Machine
650x400x1600 mm
dimensions
Weight
74 Kg
The usage of this compresor required a particular attention.
Compressed springs can be potential dangers due to force collected because of compression.
This machine must be used always with its specific frontal protection mounted correctly on the frame.
Here under listed the individual protection measures necessary to work with our product.
Protection gloves
Working shoes
REINFORCED PNEUMATIC SPRING COMPRESSOR WITH ARTICULATED JAWS
SAFETY
Protection glasses
Instruction manual