Össur UNITY Manual Del Usuario página 8

AFTER DISASSEMBLY / ASSEMBLY
Check the following:
• Are the duckbill valves oriented in the correct direction (Figure 7)?
• Is the membrane fully inserted into the housing?
• Are the inlet and outlet ports tightened?
• Is the tube fully inserted on the inlet port? (Check both at the Unity™
Socket valve and at the Unity™ Membrane housing)
THE TUBE
The tube is the most sensitive part of the Unity™ System and special
attention should be paid to it in case of any problems.
Make sure the tube is NOT:
• Folded (Figure 8).
• Pressed up against sharp objects.
• Punctured.
• Dangling during gait.
• Located laterally, as there is more likelihood of damage.
WARRANTY
The Unity™ System has a 24 month limited warranty, excluding the
membrane.
The membrane has a 12 month limited warranty.
The following activities will void the warranty:
• Exposure to seawater or extreme corrosive environment.
• Usage with Copolymer Gel liners.
• Usage without liners or other means which can lead to sweat or other
fluids than Iceross Lubricant entering the system.
• Exposure to environment with extreme airborne particle
contamination.
• Abuse and damage caused by abnormal impact.
• Tampering with the lower blade connection to foot module.
• Dents and scratches on sealing surfaces.
A weatherproof device allows use in a wet and/or humid environment
but does not allow submersion. Fresh water splashing against the
enclosure from any direction shall have no harmful effect. Dry thoroughly
after contact with fresh water. Fresh water: Includes tap water. Excludes
salt and chlorinated water.
8