Orbit WaterMaster rain Manual Para El Usuario página 15

Start Times for Program A or B
A start time is the time of day that the program begins watering the first station,
and all other stations will then follow in sequence. There are not separate start
times for each station. Start times do not correspond to specific stations. If you
enter more than one start time, all stations programmed to operate will water again
(in sequence).
• The way you set the start time is the same for both programs. Turn the rotary dial
to the Start Times position in the program that you want to set. The display will
show an A or B depending on which program you have selected. The display will
show – – : – –, and a blinking cursor in Start 1 location
[See Figure 4].
• Set the time you want to begin watering for start time 1 using the + or – keys,
then press the enter key. The display will advance to Start 2. For additional start
times, simply repeat this procedure by using the + and – keys to enter the time,
Figure 4: LCD Display with Start Time
10