Orbit WaterMaster rain Manual Para El Usuario página 29

Connecting the Transformer
• With the wiring terminal shroud off, find the two terminal holes labeled "24vac".
Make sure the transformer is not plugged in. Insert one of the two power leads
from the transformer into each terminal.
• It will be necessary to open the terminal to allow for wire insertion or removal.
To do this you will need to use a small phillips head screwdriver.
• Plug in transformer [See Figure 18].
WARNING: DO NOT LINK TWO OR MORE TIMERS TOGETHER WITH ONE
TRANSFORMER.
• Slide the shroud back on.
COM 1 2 3
Figure 18: Connecting the Transformer
4 5 6 PUMP 24V 24V
24