Orbit WaterMaster rain Manual Para El Usuario página 24

ENGLISH
blinking cursor on station 1 along with - - MINS. [See Figure 12]
• To set the number of minutes for watering duration, press and hold the + key to
advance to desired number of watering minutes. Use the - key to go in reverse.
Press Enter to begin watering.
• To skip a station, press next until the cursor is blinking over the station number
you wish to program. (Example: To set station 3 for five minutes, press the man-
ual key; then press the Next key five times to select the manual operation mode
and advance to watering for station 3; using the + or - key, set the manual
watering duration to five minutes; press Enter.) [See Figure 13]
Note: After the Manual key has been pushed, if a selection is not made within 60
seconds the display returns to the time of day.
• To halt or discontinue semi-automatic or manual watering, press the Clear key
once. The timer will revert to your original
automatic watering plan.
Using the User Selectable Rain Delay Mode
To stop automatic, manual or default watering for 24, 48, or 72 hours, use the Rain
19
Figure 14: LCD Display with Rain Delay