Orbit WaterMaster rain Manual Para El Usuario página 19

Figure 8: Ready for Automatic Operation
Program A watering start times, simply turn the rotary dial to the Start Times
position in Program A and check the times that have been entered. Using the
next key, you may advance through the schedule without fear of disturbing any
programming.
If you want to change the start times, watering days, or interval, simply follow the
directions for that program. After reviewing or changing a watering schedule,
remember to turn the rotary dial back to Auto if you want the timer to automatically
follow the program.
Ready for Automatic Operation
After programming is complete, turn the rotary selector to Auto [See Figure 8]. The
timer is now fully programmed and ready to use in the automatic mode. In auto-
matic mode, each station will operate sequentially, starting with Program A.
SECTION FOUR
Semi-Automatic and Manual Operation
14