Maintenance And Cleaning Instructions; Cleaning And Storage; Protection Of The Environment; Customer Service - VITO PRO-POWER VIBCSCSFL20 Manual De Instrucciones

EN
and vertical cuts. This indicator allows
guiding the saw through the cut lines
on the work piece. The cutting position
indicator shall be aligned with the disc's
left side;
2. The disc fixed protection (4) has a
cutting position indicator light (11) that
shows the cutting position (15) on the
parallel guide scale and lightens the
cutting outlined area.
The light keeps on while the "ON/
OFF" switch locking/unlocking button
(9) or the "ON/OFF" switch (7) are
being pressed. When both buttons are
released, the light turns off.
5. MAINTENANCE
AND CLEANING
INSTRUCTIONS
Before inspection, maintenance and
cleaning works, turn the equipment off
and remove the battery.
This equipment doesn't need additional
lubrication or maintenance. However,
it needs a proper
and a regular cleaning to operate
continuously with no issues.
Keep the cutting discs clean and
sharpened. The cutting discs object
of a proper maintenance don't stuck
so often, are easily controlled and are
more efficient.

5.1 - CLEANING AND STORAGE

Cleaning
After each use clean
components. Clean the machine with a
clean and damp cloth and blow it with
low pressure compressed air. A careful
handling protects the machine and
extends its lifespan.
This machine and its ventilation
openings must be always clean. Clean
it regularly or every time they get
obstructed.
Storage
Every time the machine isn't being
used, store it inside dry, clean and
corrosive steam free places away from
children's reach. Remove the battery
when storing the tool.
6. PROTECTION OF THE
ENVIRONMENT
The packaging is made up of
recyclable materials, which
you can dispose on local recycling
points.
Never place power tools in
the domestic waste!
According to the European Directive
2012/19
electronic equipment waste and its
transposition into national law, power
tools must be collected separately
and delivered to the collection sites
provided for this purpose.
You can obtain information regarding
the disposal of the machine through
maintenance the person in charge for the recycling
in your city.

7. CUSTOMER SERVICE

Phone: 00351 256 331 080
E-mail: sat@centrallobao.pt
Website: www.centrallobao.pt
all the
/EC on electrical and
27