Troubleshooting; Warranty; Declaration Of Conformity - VITO PRO-POWER VIBCSCSFL20 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
Problem - Cause
The tool does not activate when pressing the "ON/
OFF" switch:
� Discharged battery;
� The switch is not working or the connections are damaged;
The "ON/OFF" is locked:
� The "ON/OFF" switch locking/unlocking button is not
pressed;
The cutting depth is inferior to the selected value;
� Sawdust underneath the supporting base;
The disc vibrates or slides during operation:
� The disc is not properly tightened;
The disc does not perform a straight cut:
� The blade is not sharpened;
� The disc is not properly assembled;
� The circular saw is not being properly operated;

9. WARRANTY

The warranty of this product is two years from the date
of purchase. You should, therefore, keep your proof of
purchase during this period of time. The warranty covers
any manufacturing defect in material or operating, as well
as parts and work needed for their recovery.
Excluded from the warranty the misuse of the product, any
repairs carried out by unauthorized persons (outside the
service center of the brand VITO) as well as any damage
caused by the use of it.
28
8. FAQS / TROUBLESHOOTING
Solution
� Charge the battery;
� Repair or replace the switch;
� Press the locking/unlocking button of the "ON/
OFF" switch;
� Clean the supporting base;
� Tighten the fixing screw;
� Insert a sharpen blade in the circular saw;
� Check if the blade is properly assembled;
� Use the parallel guide;

10. DECLARATION OF CONFORMITY

We declare under our exclusive responsibility, that the
product Meets the following standards or standardisation
documents: EN 60745-1:2009+A11:2010, EN 60745-2-
5:2010, IEC 60745-1:2006 (Fourth Edition), AfPS GS
2014:01 PAK, EN 55014-1:2006+A1:2009+A2:2011,
EN 55014-2:2015, EN 62321-1:2013, EN 62321-
2:2014, EN 62321-3-1:2014, EN 62321-4:2014, EN
62321-5:2014, EN 62321-6:2015, EN 62321:2009
according to the determinations of the directives:
2006/42/EC - Machinery directive;
2014/30/EU - Electromagnetic compatibility directive;
2011/65/EU - RoHS Directive;
2000/14/EC
- Sound power level mesured: LpA: 79,2
dB(A);
- Sound power level guaranteed: LwA: 90,2 dB(A).
S. João de Ver, 24 April 2018
Central Lobão S. A.
Responsible for the Technical File
18

Publicidad

Tabla de contenido
loading

Tabla de contenido