Descargar Imprimir esta página

General Safety Rules - Homelite F-3045 Manual De Utilización

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 41
Trimmer/Brushcutter-17 lgs
GB
F
D
E
Thank you for buying a Homelite trimmer.
Your new trimmer has been engineered and manufactured
to Homelite's high standard for dependability, ease of
operation, and operator safety. Properly cared for, it will
give you years of rugged, trouble-free performance.
WARNING
To reduce the risk of injury, the user must read
and understand the operator's manual.
WARNING
Do not attempt to operate this trimmer until you
have read thoroughly and understood completely
all instructions, safety rules etc contained in
this manual. Failure to comply may result in
accidents involving fire, electric shock or serious
personal injury. Save operator's manual and
review frequently for continuing safe operation,
and instructing others who may use this tool.
READ ALL INSTRUCTIONS.

GENERAL SAFETY RULES

For safe operation, read and understand all
instructions before using the trimmer/brushcutter.
Follow all safety instructions. Failure to follow all
safety instructions listed below, can result in serious
personal injury.
Do not allow children or untrained individuals to use
this unit.
Never start or run the engine in a closed or poorly
ventilated area; breathing exhaust fumes can kill.
Clear the work area before each use. Remove all
objects such as stones, broken glass, nails, wire or
string which can be thrown or become entangled in
the string head or blade.
Wear full eye and hearing protection while operating
this unit.
Wear heavy long trousers, boots and gloves. Do not
wear loose fitting clothing, shorts, jewellery of any kind,
or go barefoot.
Secure long hair so it is above shoulder level to
prevent entanglement in any moving parts.
Keep all bystanders, children and pets at least 15 m
(50 ft) away.
Do not operate this unit when you are tired, ill or
under the influence of alcohol, drugs or medication.
Do not operate in poor lighting.
Keep firm footing and balance. Do not overreach.
Overreaching may result in loss of balance or
exposure to hot surfaces.
Keep all parts of your body away from any moving part.
30/09/03
17:00
I
P
NL
S
DK
English
SPECIFIC SAFETY RULES FOR TRIMMER USE
SPECIFIC SAFETY RULES FOR
BRUSHCUTTER AND BLADE USE
13
Page 13
N
FIN
GR
H
CZ
Do not touch area round the silencer or cylinder of the
trimmer/brushcutter; these parts get hot from operation.
Always stop the engine and remove the sparking plug
wire before making any adjustments or repairs except
for carburettor adjustments.
Inspect the unit before each use for loose fasteners,
fuel leaks etc. Replace any damaged parts before use.
The string head or blade will rotate during carburettor
adjustments.
Keep the tool well maintained, fasteners tightened
and worn parts replaced.
Mix and store fuel in a container approved for petrol.
Mix fuel outdoors where there are no sparks or flames.
Wipe up any fuel spillage. Move 9 m (30 ft) away from
refuelling site before starting engine.
Stop the engine and allow to cool before refuelling or
storing the unit.
Allow the engine to cool; empty the fuel tank and secure
the unit from moving before transporting in a vehicle.
Replace string head if cracked, chipped or damaged
in any way. Be sure the string head or blade is
properly installed and securely fastened. Failure to do
so can cause serious injury.
Make sure all guards, straps, deflectors and handles
are properly and securely attached.
Use only the manufacturer's replacement string in the
cutting head. Do not use any other cutting attachment.
Never operate unit without the grass deflector in
place and in good condition.
Maintain a firm grip on both handles while trimming.
Keep string head below waist level. Never cut with
the string head located over 76 cm (30 in) or more
above the ground.
After engine stops, keep rotating blade in heavy grass
or pulpy weeds until it stops.
Do not operate the brushcutter unless the blade
guard is firmly secured in place and in good condition.
Use heavy gloves while installing or removing blades.
Always stop the engine and remove the sparking plug
wire before attempting to remove any obstruction
caught or jammed in the blade or before removing
and installing the blade.
RUS
RO
PL

Publicidad

loading