1. Drive select lever
1. Levier de présélection
1. Palanca de selección de marcha
1. Recoil starter
1. Lanceur à réenroulement
1. Arranque por tracción de cable
Drive select lever
The drive select lever is used to shift your ma-
chine into the low, high, neutral, reverse and
park positions. (Refer to pages 6-11 ~ 6-15 for
the drive select lever operation.)
Recoil starter
Firmly grasp the handle and pull slightly until
engagement can be felt. Then pull forcefully,
being careful not to pull the rope all the way
out.
WARNING
Shift the transmission in neutral or set the
shift lever to the park position before starting
the engine or the ATV could start to move un-
expectedly, which could cause an accident.
4-29
EBU00608
EBU00667