Siemens SITRANS F FST020 IP65 NEMA 4X Instrucciones De Servicio página 16

Connecting
2.2 Mounting the Transmitter
9. If unit is operational, turn power off, close Keypad Enclosure Cover and secure the six
cover screws (torque to 6 in-lbs).
Note
Do not position the transmitter in such a way that it is difficult to operate the circuit
breaker or the disconnection device.
10.Turn power on. Within 10 seconds of power-up the transmitter 2-line LCD display screen
will appear.
Display Screen Activation
At power-up the FST020 display screen will display one of the following:
● The scrolling Siemens Welcome Screen (i.e., if no channel had been previously
activated), or
● The active channel's last data screen displayed prior to turning off the instrument.
The alphanumeric LCD display screen of the FST020 provides visual access to all system
variables and conditions. During initial power-up the 2 x 16 character alphanumeric display
only allows access to the numerous installation menus offered by the FST020 system. Once
a measurement channel is activated and begins operation it can display a wide variety of
meter data.
After successful channel installation, use the Keypad and repeatedly press the <Left Arrow>
until the display indicates flow data.
Note
Repeatedly press the <Left Arrow> key from any location within the Installation Menus to
return to the flow display.
14
①
Power-up 2-Line LCD Display Screen
FST020 IP65 NEMA 4X Quick Start
Operating Instructions, 08/2014, A5E03086489-AJ