Technoline WS 9485 Manual De Instrucciones página 31

maintain accurate timing. If reception fail, scanning stops ("
LCD disappear)

The clock can be set to scan the time signal manually by holding "▼"
and "▲"button for 3 seconds. Each reception takes about 5 minutes.
If receptions fail, scanning stops.

Stop scanning by holding "▼" and "▲"button for 3 seconds.

"DST" shown on the LCD if it is in daylight saving time mode.
Manual time setting:

Hold the "MODE" button (B2) for 3 seconds to enter time setting mode.

Press the "▲" or the "▼" button to adjust the setting and press the
"MODE" button to confirm each setting. Keep the "▲" or the "▼" button
pressed, to accelerate the process and reach the desired value more
quickly.

The setting sequence is shown as follow: 12/24 hour time display ->
time zone -> hour -> minute -> second -> year -> month -> Day ->
weekday language.

Time zone setting can be used to set difference from DCF77 time, for
example 0 for Germany or -1 for UK.
EN12
" on