Making The Electrical Connection - HAMPTON BAY 91252 Guía De Uso Y Mantenimiento

Assembly - Hanging the Fan (continued)
5
Wiring the receiver to the
household wiring
WARNING: To avoid possible electrical shock, turn the
electricity off at the main fuse box before wiring. If you
feel you do not have enough electrical wiring knowledge
or experience, contact a licensed electrician.
WARNING: Each wire not supplied with this fan is designed
to accept up to one 12-gauge house wire and two wires
from the fan. If you have larger than 12-gauge house wiring
or more than one house wire to connect to the fan wiring,
consult an electrician for the proper size wire nuts to use.
IMPORTANT: Use the wire connecting nuts (BB) supplied
with your fan. Secure the connectors with electrical tape
and ensure there are no loose strands or connections.
□
Spread the wires apart so that the green and white wires are on
one side of the outlet box and the black wire is on the other side.
□
Connect the green fan wires to the household ground wire (this
may be a green or bare wire) using a wire connecting nut (BB).
□
Connect the receiver black (or red) wire to the household black
(hot) wire using a wire connecting nut (BB).
□
Connect the receiver white wire to the household white wire
(neutral) wire using a wire connecting nut (BB).
□
Secure each wire connecting nut using electrical tape.
Black
Black
(or Red)
Receiver
Antenna
Receiver(H)
Outlet Box
in the ceiling
(LL)
Green (or Bare)
BB (x3)
White
Green
White
L
6

Making the electrical connection

WARNING: Each wire nut supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
IMPORTANT: Use the plastic wire connectors (BB) supplied
with your fan. Secure the connectors with electrical tape and
ensure there are no loose strands or connections.
NOTE: The fan comes with 54 in. lead wires for use with
an extended ball/downrod assembly. If using the 6 in. ball/
downrod assembly (B) provided, you can cut the lead wires to
your desired length (no shorter than 12 in.).
□
The fan comes with 54 in. lead wires for use with an extended
ball/downrod assembly. If using the 6 in. ball/downrod assembly
(B) provided, you can cut the lead wires to your desired length (no
shorter than 12 in.) This will make extra room in the canopy (C),
if you do not wish to cut the wires, you will need to neatly wrap
them.
□
Connect the fan motor white wire to the receiver white wire using
a wire connecting nut (BB).
□
Connect the fan motor black wire to the receiver black wire using
a wire connecting nut (BB).
□
Connect the fan motor blue wire to the receiver blue wire using a
wire connecting nut (BB).
□
Secure each wire connecting nut using electrical tape.
□
Turn the wire connecting nut (BB) upward and push the wiring
into the outlet box (LL).
Receiver (L)
Receiver
Antenna
BB (x3)
10
Outlet box
in the ceiling
(LL)
Green
Blue Black White