Attaching The Medallion To The Blades; Fastening The Blades To The Motor - HAMPTON BAY 91252 Guía De Uso Y Mantenimiento

Assembly - Hanging the Fan (continued)
9
Attaching the medallion to the
blades
□
Attaching the medallion (G) to the blade (J) by using the
attachment screws (AA) provided, inserting a attachment
screw (AA) through a hole in the blade (J) and into the
medallion (G).
□
Tighten each screw securely.
□
Repeat these steps for the each medallions (G) and blades (J).
10

Fastening the blades to the motor

□
Attach the blade (J) to the blade bracket (TT) of the fan
motor assembly (E) by aligning the screw holes in the blade
(J) with the screw holes in the blade bracket (TT) of the fan
motor assembly (E).
□
Insert the attachment screw (AA) into the blades (J) and
through the blade bracket (TT) of the fan motor assembly
(E).
□
Tighten each screw (AA) securely.
□
Repeat this step for the remaining blades (J).
Assembly - Installing the Light Kit
1
Attaching the light kit pan to the
motor assembly
□
Remove one of three mounting screws (PP) on the black
bracket below the fan motor assembly (E), loosen but do
not remove the other two mounting screws.
□
Align the two key slots in the light kit pan (H) with two
mounting screws on the black bracket that were loosened
in step 1, place the light kit pan (H) over the two screws,
turn the light kit pan (H) clockwise until it locks, tighten
each screws (PP).
□
Re-install the mounting screw (PP) that was removed in
step 1 and tighten firmly.
12
AA
J
G
E
TT
PP
AA
J
E
H