Remote Operation; Operating The Remote Control - HAMPTON BAY 91252 Guía De Uso Y Mantenimiento

Operation
CAUTION: This device complies with part 15 of the FCC rules.
Changes or modifications not expressly approved by the
manufacturer could void your authority to operate this equipment.
Remote Control - Your fan is equipped with a remote control to
operate the speed and lights of your new ceiling fan.
The appropriate speed settings for warm or cool weather depends
on factors such as the room size, ceiling height, and number of
fans.
NOTE: The reverse switch is located at the top of motor housing.
Shut the fan off then wait until the blades have completely
stopped before flipping the switch to reverse the direction of your
ceiling fan.
Warm weather - (Forward) A downward airflow creates a cooling
effect. This allows you to set your air conditioner on a warmer
setting without affecting your comfort.
Cool weather - (Reverse) An upward airflow moves warm air off
of the ceiling. This allows you to set your heating unit on a cooler
setting without affecting your comfort.

Remote Operation

1

Operating the remote control

□
Remove the protective coating from the battery.
□
Remove the battery cover from the remote control.
□
Install the 9-Volt battery (included) into the battery
compartment of the remote control (L).
□
Replace the battery cover on the remote control.
□
Press the desired button on the remote control (L) to operate
the fan:
•
"High" button: Press to turn the fan on and set the fan
speed to high.
•
"Med" button: Press to turn the fan on and set the fan
speed to medium.
•
"Low" button: Press to turn the fan on and set the fan
speed to low.
•
Power button (UU): Press to turn the fan off.
•
Light button (VV): Press and release immediately to turn
the light on or off.
Power Indicator will light
when buttons are pushed
ON/Low
ON/Medium
14
LIGHT ON/OFF
VV: Light ON/OFF
LOW MED HIGH
ON/High
FAN OFF
UU: Power OFF
L
TM