Connection And Setup - Changhong LED32E4500ST2 Operación Manual

Connection and setup

Before the installation and use, please read carefully the relevant content in "Warning
and Safety instructions".
: Connect it to your headphone or other audio equipment.
HDMI: Support AV devices with an HDMI connector (such as set top box, DVD player,
digital TV set, etc.).HDMI is also called as high definition multimedia interface, and it
can transmit digital audio and video signal with one cable.
NOTE:
 HDMI 1 (supports ARC function)
ARC: (Audio Return Channel) Adopted in TV output of digital audio, can be connected
to the device supporting ARC, transmit the TV sound to the device.
PC: Connect one end of the VGA cable with the VGA port on computer, connect the
other end of the VGA cable with the VGA port on the TV, and tighten the bolts
clockwise on the each end of VGA cable.
NOTE:
 When connect to a computer audio output, make sure you connect audio cables to
the PC/AV/YPbPr audio
 While connecting the 15-pin VGA, please do not insert the plug overexerted, for fear
the pin might be broken.
SCART: Connect SCART socket input or output from an external device to these jacks.
ANT:
Used to connect the antenna and receive signals of the external antenna.
CVBS: Connect an AV device that has composite video jacks, such as a VCR or a DVD
player
Y/Pb/Pr (Component): Connect a device that has component video jacks, such as a
DVD player.
NOTE:
 COMPOSITE VIDEO and COMPONENT(Y/Pb/Pr) share with audio in.
 If COMPONENT (YPbPr) and AV works as mini terminal, and shared same audio,
Please choose to use a one-to-three audio &video cable.
COMMON INTERFACE: Please insert CI card into the
according to the arrow on the CI card.
DIGITAL AUDIO OUT: Sending the TV's digital audio signal to external audio
equipment via the
USB: Connect a USB Storage device and multimedia file playback.
NOTE:
※
The range of power input for the TV is 100-240V~ 50/60Hz; Do not connect the
TV power input port with the power cable out of the above range.
※ Before connecting to an external device, please firstly make sure that the TV set
and the external device have been turned off. When connecting, please make
reference to the interface name and the interface color to connect the signal cable.
※ Please hold the insulated part of the plug when you are unplugging the power cable,
do not touch directly the metallic part of the cable.
Connection Installation
jacks.
Digital Audio Output port.
COMMON INTERFACE
8 8
slot