Hotel Mode - Changhong LED32E4500ST2 Operación Manual

Menu Operation
– Auto Power On: Pushing the "Play" button on the CEC enabled device will
command the device to play, turn the TV on, and the HDMI input, that the device is
connected to, will become the active input device for the TV.
– Device List: Display devices that are connected to TV.
■ Power On Logo: Switch the Power On Logo function On or Off.
■ Default: Restore the system settings to the factory default. When the restore is
complete, the TV will enter standby mode.
■ DivX(R) VOD: When entering this option, you can view the registration code
relevant information about the DivX ®.
■ Installation Guide: This is an installation guide to help you to setup the TV.
■ Software Version: Display current software version information.
■ Software Update (USB): Update the software using the USB memory device.
Please be careful not to disconnect the power or remove the USB drive until
updates are complete.
Press the SOURCE button to display the Source Menu, then press 2012 to
enter into the Hotel Mode to adjust the relative settings.

- Hotel Mode

Press the buttons to select Hotel Mode, and then
/
◄/►
press button to set On or Off.
NOTE:
 The following settings work only when Hotel Mode is
set to be On.
- On Source
Set the default signal source by pressing the ◄/► buttons.
(The default signal source will be displayed when the TV
is turned on.)
- On Channel
Set the default channel by pressing the ◄/► buttons.
(The default channel will be displayed when the TV is
turned on.).
- On Volume
Set the default volume by pressing the ◄/► buttons. (The default volume is the
volume when the TV is turned on. Remember the default volume should be less than
the maximum volume).
- Max Volume
Set max volume by pressing the ◄/► buttons. When the max volume is lower than
the default volume, the max volume is the priority.
- Export to USB
You can export all current channel information (including channel number, channel
name, frequency, etc.) into the U disk, as the channel information backup for this unit.
- Import from USB
If you cannot restore the initial channel information after sort, move, skip, lock etc.
operations, you can import the channel information from the USB.
Hotel Mode
23 23
Hotel Mode
On
On Source
Air
On Channel
2
On Volume
30
Max Volume
60
Export to USB
Import from USB
Select Return