Outdoor Unit - DiO VDP-IP01 Guía Rápida

3.2 7'' Screen
1) Make 4 holes in line with positions shown on the wall bracket.
2) Insert the pins into the holes and fix the wall bracket using the screws provided.
3) Connect the power cable and the outdoor unit wire (to do this you must use a terminal block between the 2 connectors to
connect the screen to the outdoor unit).
4) Place the screen on the wall bracket as described in the picture.
4. Connection of the 2 units
1
2

4.1 Outdoor unit

Note: A small flat screwdriver is required to connect the wires. Push
to insert the cables. (Check that they are connected correctly).
Connect the screen wire to the outdoor unit.
(The burglar alarm button is located on the back of the outdoor unit.
It is not a reset button)
4.2 Screen
Connecting the power adapter
First, attach the terminal block to the cable connecting the outdoor
unit to the screen.
Connect the terminal block to the screen wires.
1
2