Configuration Wizard - DiO VDP-IP01 Guía Rápida

To hide the terminal strip
Be careful with the size of the chosen terminal strip, if it is small it can be hidden in the space for the connectors (as shown in the
image below).
5. Inicial configuration

5.1 Configuration wizard

The first time you turn on the display, a wizard will guide you to configure the main settings of your videophone.
Please follow these steps before using the device.
Create Password
Please enter a new password
Create Password
Please enter the password again
Please enter a new password
Password length 8 to 16 characters
Please enter the password again
Password length 8 to 16 characters
Wizard-Language 1/4
English
P
Wizard-Language 1/4
English
Deutsch
P
Italiano
Deutsch
Français
Italiano
Français
Wizard-Network 2/4
DHCP
Local IP
Wizard-Network 2/4
DHCP
Subnet Mask
Local IP
Gateway
Subnet Mask
OK
OK
Next Skip
Next Skip
192.168.1.26
255.255.255.0
192.168.1.26
192.168.1.1
255.255.255.0
Result with the plate to be fixed first.
If it is bigger, take it into account and make a hole in your wall so that
it can pass through without problems.
Step 1
Turn on the screen. An activation page will appear. Choose an ad-
ministrator password for later access to the configuration menu.
Press OK to activate it.
ATTENTION: When you create the password, write it down
somewhere. Every time you want to change a configuration pa-
rameter you will need the password.
We recommend that you create a strong password of your choice
(using a minimum of 8 characters, including at least three types
of the following categories: uppercase letters, lowercase letters,
numbers and special characters) to increase the security of your
product.
Password: ....................................
Step 2
Select your language
(This step will have to be reconfirmed later by going through the
configuration again so that both units have the same language).