Open Source Software Notice Information; Using Smart Diagnosis - LG GTF916PZPZD Manual Del Proprietário

Connecting to Wi-Fi
The Wi-Fi button, when used with the LG
SmartThinQ application, allows the appliance to
connect to a home Wi-Fi network. The Wi-Fi
icon shows the status of the appliance's
network connection. The icon illuminates when
the appliance is connected to the Wi-Fi network.
Initial Appliance Registration
Run the LG SmartThinQ application and follow
the instructions in the application to register the
appliance.
Re-registering the Appliance or
Registering Another User
Press and hold the Wi-Fi button for 3 seconds
to temporarily turn it off. Run the LG
SmartThinQ application and follow the
instructions in the application to register the
appliance.
NOTE
• To disable the Wi-Fi function, press and hold
the Wi-Fi button for 3 seconds. Wi-Fi icon will
be turned off.
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit http://
opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such as
the cost of media, shipping, and handling) upon
email request to opensource@lge.com. This
offer is valid for a period of three years after our
last shipment of this product. This offer is valid
to anyone in receipt of this information.

Using Smart Diagnosis™

• For appliances with the
Smart Diagnosis™ Through the
Customer Information Centre
Use this function if you need an accurate
diagnosis by an LG Electronics customer
information centre when the appliance
malfunctions or fails. Use this function only to
contact the service representative, not during
normal operation.
Display panel is on the Freezer door.
1
Close the Freezer and Fridge doors, then
press and hold the Lock button to activate
the lock function.
• If the display has been locked for over 5
minutes, you must deactivate the lock and
then reactivate it.
EN
or logo
25