How To Install The Home Station - LG HOM-BOT VR6480 Manual Del Proprietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

HOW TO INSTALL THE HOME STATION

How to Install the Home Station
1. Position the home station against a wall on hard, level flooring to
prevent sliding during docking.
Installing the home station on carpet is not recommended. The
robot cleaner may have difficulty docking.
Remove objects within 1.5 m to the right and left side and within
2 m to the front.
2. Plug the jack into the home station.
3. Plug the power cord into an outlet.
Wrap the remaining power cord around the fixed hook on the back
side of the home station or along the wall surface so that the travel
path of the Robot Cleaner will not be obstructed.
4. Fix the home station against the wall so that it does not move.
Then turn on the power switch.
5. When the remote controller is not used, store it in the remote
controller holder on the home station.
Tip
• Always keep the home station plugged in when in use. If the home station is not plugged in,
the Robot Cleaner will not return to the station to charge automatically.
< Warning >
Do not operate the Robot Cleaner if the Home Station has a damaged cord or
plug, if it is not working properly, or if it has been damaged or dropped. To
avoid electrical hazards, the cord must be replaced by LG Electronics, Inc. or a
qualified service person.
1.5
2
1.5
power cord keeper
15

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido