LG HOM-BOT VR6480 Manual Del Proprietário página 8

CAUTION
Frequently empty the dust bin
and maintain its cleanliness.
The dust collected in the dust
bin can trigger allergies and
may contain harmful insects. it
should be cleaned after each
use.
Use the Robot Cleaner
indoors only.
Using it outdoors can cause
product failure and irreparable
damage to the unit.
Close the cover of the dust
bin on the main unit before
starting cleaning.
If the cover is not closed, it can
cause injury or product damage.
DO NOT use the Robot
Cleaner around a banister,
staircase or any other
dangerous place.
Doing so could cause injury or
damage to the unit.
In rare cases, the Robot
Cleaner's brush can damage
carpet. If this happens,
immediately stop the cleaning
operation.
When a carpet has long tassels,
the tassels can be damaged.
Do not let the main unit and
charging terminal of the
home station come into
contact with metallic objects.
Doing so can cause product
failure.
Do not put water, detergent,
etc. into or onto the Robot
Cleaner.
Doing so can cause product
failure. Do not put any water or
detergent on the Robot Cleaner.
If liquids get inside of the Robot
Cleaner, turn off the power
supply and contact an LG
Electronics sales agent or
customer care center.
SAFETy PRECAUTIONS
Do not drop the Robot
Cleaner or subject it to strong
impacts.
Doing so can cause injury or
product failure not covered by
the warranty.
Do not expose the Robot
Cleaner to cold temperatures
(less than -5 ˚C) for a long
period of time.
Doing so can cause product
failure.
Remove any cables or string
from the floor before starting.
Cable or string can get tangled
in the wheels of Robot Cleaner
and cause product failure or the
cord of an appliance can be
disconnected.
Make sure the Robot Cleaner
is not put on a table or desk,
with the power ON.
It may result in an injury or
damage to the product.
Do not allow the Robot
Cleaner to sweep up liquids,
blades, thumb tacks, sharp
objects or ashes, hot or cold.
etc.
These items can cause product
failure or damage.
Do not put sharp objects into
the opening of the Robot
Cleaner's ultrasonic sensors.
Doing so can cause product
failure.
Do not use the Robot Cleaner
when the dust bin is
completely full.
Doing so can cause product
failure.
5