20 How To Charge The Battery; Automatic Charging; Manual Charging - LG HOM-BOT VR6480 Manual Del Proprietário

HOW TO CHARGE THE BATTERy

Automatic charging

The Robot Cleaner returns to the home station at the end of a
cleaning cycle or when its battery is running low.
※ If 10 minutes elapse without the Robot Cleaner moving or the
battery is too low, the power will be automatically turned OFF.
※ Do NOT turn OFF the Main Power Switch as the battery will
not be recharged. If the machine is returned manually with the
Main Power Switch OFF, it announces an error message, "Main
power switch on the back of the Roboking is turned off. Please
turn the switch on."
※ In the event that the unit returns to the Home Station due to a low
battery during the cleaning, cleaning will be started, after recharging, from the nearest place of the area
which has not been cleaned before. (Page 19)
※ If Robot Cleaner is unable to dock to the home station on its first attempt, it will try again until it docks
successfully.
※ When Robot Cleaner has completed all areas that it can clean, it will return to the home station even
when the battery level is not low.

Manual charging

You can manually charge the battery prior to using the Robot Cleaner for the first time or to charge the
battery during cleaning.
※ If the Robot Cleaner did not start cleaning from the home station or if the Robot Cleaner is manually
charged by pressing the Home button, it may take slightly longer to find the home station.
※ If the Robot Cleaner is within 10 cm of the front of the charging terminal while the power is turned on from
Standby, it will automatically be returned to the home station and charging will begin.
Tip
Take the following precautions when using the home station:
• If foreign material is caught on the charging terminal, charging may not be activated. Wipe the
terminal from time to time with a dry cloth after the power plug is disconnected.(p56)
• To prevent electric shock or damage to the home station, do not touch the charging terminal
with any metallic objects.
• To avoid fire or electric shock, never disassemble or modify the home station.
18
• Do not to place the Robot cleaner, the home station or power plug near a heating source.
Method 1. Attach the Robot Cleaner to the home
station by aligning to the front side of the
home station. A melody sound will be
generated along with an audio message to
start charging.
※ If a voice message, "Main power switch
on the back of the Roboking is turned
off. Please turn the switch on." is
announced repeatedly, then turn on the
Main Power Switch.
Method 2. When the 'HOME' button of the remote
control or the Robot Cleaner is pressed,
charging will be prompted by automatically
generating a searching signal and returning
the Robot Cleaner to the home station.