Before You Call For Service - LG HOM-BOT VR6480 Manual Del Proprietário

BEFORE yOU CALL FOR SERVICE

Confirm before reporting the failure of Robot Cleaner.
Problem
The power supply cannot be
turned on.
The power supply
automatically turns off.
The Robot Cleaner will not
charge.
Suction power becomes weak.
Noise becomes louder.
The Robot Cleaner will not
activate.
The lower brush does not
rotate.
Movements or travel path are
abnormal.
The Robot Cleaner cannot
be activated with the remote
control.
62
Solutions (Reference page)
Check that the power switch is turned on. (Page 16)
This is not a failure. Robot Cleaner has its own power saving function.
If it is not used for ten minutes after the power supply is turned on,
the power will automatically turn off. (Page 18)
► Check whether the main power switch is turned on.
► Remove objects around the home station. (Page 16)
► Confirm that the power supply is connected to the home station.
(Page 15)
► Wipe the charging terminals with a dry cloth.
► Check whether there is foreign material blocking the suction port.
(Page 55)
► Empty the dust bin. (Page 53)
► Clean the dust bin filter. (Page 54)
► Confirm that the dust bin has been mounted properly.
► Confirm that the dust bin filter has been mounted properly.
(Page 54)
► Check whether foreign material is caught in the brush. (Page 55)
► Confirm that the power switch is turned on. (Page 16)
► Confirm that the battery has been charged. (Page 19)
► Clean the brush. (Page 55)
► Confirm that the brush has been mounted properly. (Page 55)
► Carefully wipe the sensors with a dry soft cloth. (Page 56)
► If the ultra microfiber mop is attached, confirm that it is mounted
properly. (Page 28)
► Turn the main power switch off and on.
► Replace the remote control batteries. (Page 13)
► Confirm that the control is within the coverage area of the main
unit, which is less than 3 m. (Page 13)
► Check whether the main power switch is turned on. (Page 16)