General Operation - Pentair 3200 NXT Manual De Uso

3200 NXT EN _P19-35
1.1
DISPLAY PANEL FUNCTIONS
E
N
G
L
I
S
H
1
2
This button allows to access diagnostic functions.
This information is a maintenance help: instant flow, peak flow, totaliser, number of hours
between the two last regenerations, number of hours since the last regeneration, remaining
capacity, valve position and diagnostic card version.
3
Press this button to start a manual delayed regeneration.
- In timeclock or meter delayed, pressing the button will start a regeneration at the time set.
The electronics registers the request for regeneration: the blue LED flashes and the letters
RGQ show on the display. The regeneration will start at the time programmed.
- Pressing the button a second time will cancel the request for regeneration
Pressing and holding the button for 5 seconds will start an immediate regeneration, independent
of which mode of regeneration is programmed.
During the regeneration, pressing this button will fast cycle to the next step of regeneration.
20
19/01/10 14:07 Page 20

1 - GENERAL OPERATION

Status Light, multi-colour LED
Blue The unit is in service and no errors detected
Blue flashing The unit is in service with a queued regeneration
Green The unit is in regeneration
Green flashing The unit is in standby position, in a multi tank system
Red The electronics have detected an error
Diagnostic button D
Regeneration button
3200 NXT