Technoline WS 6445 Manual Del Usuario página 18

Problem
LCD is blank
No Outdoor Temperature and
Humidity is displayed
Temperature, humidity, or air
pressure is incorrect
SPECIFICATIONS:
Temperature Range
Indoor +32°F to +122°F (0°C to +50°C) (display shows HH.H / LL.L if out of this range)
Outdoor -58°F to +158°F (-50°C to +70°C) (display shows HH.H / LL.L if out of this range)
Humidity Range
Indoor
Outdoor
Temperature Resolution
RH% Resolution
Temperature & Humidity
Air Pressure Range
Alarm Duration
Snooze Duration
Solution
1. Press RESET on the main unit.
2. Replace fresh batteries in your weather station.
3. Make sure the AC/DC adaptor is plugged into an working AC
outlet properly.
4. Make sure the DC jack is plugged in to the weather station
properly.
1. Press and hold
for outdoor temperature signal again.
2. Press and hold
reinstall with new ones to your outdoor transmitter.
3. Make sure the correct channel is selected on your weather station
(default setting is
4. Observe if the Low Battery icon appears on the right of the
outdoor temperature. If yes, replace batteries in outdoor
transmitter with new alkaline batteries.
5. No other interfering sources are being used (such as computer
monitors, TV sets, headphones, or speakers) in the path of signal
from the outdoor sensor. The signal travels in a straight line, an
electrical source near t at "line" may cause interference.
1. Press RESET on the main unit.
2. Make sure your main unit and the outdoor transmitter is away
from sources of heat / cold / direct sunlight / rain.
20% - 95%
20% - 95%
0.2°F / 0.1°C
1%
measure every 30 seconds
850 hPa to 1050 hPa
2 minutes
5 minutes
GB 9
/ CHANNEL on the weather station to search
/ CHANNEL, then take out the batteries and
– Channel 1)