Technical Data - Kübler CODIX 533 Manual Del Usuario

The best way to program such a function is to set
up a table like the one opposite:
Example
PEr
ou. 1 0 V
PE. 1 5 s
ou. 2 3 V
PE. 2 5 s
ou. 3 2 V
PE. 3 10 s
ou. 4 3 V
PE. 4 10 s
ou. 5 3 V
PE. 5 10 s
ou. 6 8 V
PE. 6 10 s
ou. 7 8 V
PE. 7 10 s
ou. 8 0 v
PE. 8 5 s
EN - Page 10
Own values
8

5. Technical Data

Display 4-digit red 7-segment LED dis-
play, height 8 mm
Supply voltage: 10 ... 30 V DC, electrically isolated
Current consumption:
39 mA at 25°C, for a 20 mA
output current at 24 V DC
Power consumption:
max. 1 W
Test voltage: 500 V, 50 Hz., 1 min.
Test voltages: EN 61010-1 for contamination
level 2 and
overvoltage category 2
EMC: Interference emissions
EN 55011 Class B
Interference immunity
EN 61000-6-2
EN 61000-6-3
Operating temp.: -20 ... +65 °C, without condensation
Storage temp.: -25 ... +85 °C, without condensation
Air humidity: 90% at 25 °C,
without condensation
Protection: IP65 front
Weight: approximately 50 g
Inputs: 2 front side keys for setting and
programming
Hold input, optocoupler, high active
low: 0 .. 2 VDC / high: 4 .. 30 VDC
Outputs: Current output 0 ... 24 mA,
increment 10 µA
Load 20 mA up to ≤ 500 Ohms,
> 20 mA up to ≤ 400 Ohms
Ripple: <10 mVss
Voltage output 0 ..12 V,
increment 10 mV,
Load ≥ 2 kOhms, Ripple:
<10 mVss
Accuracy: < 0,2 % of the upper range value
+ 0,02 %/K