Patek Philippe 5270 Manual Del Usuario página 17

The adjustments and corrections must be per-
18
formed strictly in the order described below:
1
SETTING
AND THE MONTH
To simultaneously correct these two displays,
actuate the push piece between 12 and 1 o'clock
as often as necessary to display the current
year (4 = leap year; 1 = 1st year after leap year;
2 = 2nd year after leap year; 3 = 3rd year after
leap year) and the current month. The brochure
delivered with your watch – "Leap year and full
moon calendar" – will show you the current leap-
year cycle.
2
SETTING
To set the date, actuate the correction push
piece between 11 and 12 o'clock as many times
as needed to display the current date.
3
SETTING
To set the day of the week, actuate the correc-
tion push piece between 10 and 11 o'clock as
many times as needed to display the current day.
4
SETTING
Each time you press the push piece between
6 and 7 o'clock, the moon-phase display will
advance by one day. Advance the lunar disk
until the full moon appears in the aperture.
Consult a moon-phase calendar (brochure "Leap
year and full moon calendar") or at www.patek.
com (click on "Patek Philippe", "Movements",
"Complications/Settings", "The Lunar Phase
Indicator") and count the number of days that
have elapsed since the last full moon (relative
to the current date). To set the correct moon
/
CORRECTING THE LEAP
/
CORRECTING THE DATE
/
CORRECTING THE DAY OF THE WEEK
/
CORRECTING THE MOON PHASE
-
YEAR CYCLE