1. Final gear case cover
1. Couvercle du carter de transmission finale
1. Cubierta del cárter de la transmisión final 2. Perno (× 2)
1. Final gear oil drain bolt
1. Boulon de vidange d'huile de transmission finale
1. Perno de drenaje de aceite del engranaje final
3. Install the oil filler bolt and tighten it to the
Final gear oil replacement
1. Remove the final gear case cover.
2. Bolt (× 2)
2. Place the machine on a level place.
2. Boulon (× 2)
3. Place a container under the final gear case to
4. Remove the oil filler bolt and the drain bolt to
5. Install the drain bolt and tighten it to the spec-
8-43
specified torque.
Tightening torque:
Oil filler bolt:
23 Nm (2.3 m·kgf)
collect the used oil.
drain the oil.
ified torque.
Tightening torque:
Drain bolt (final gear case):
23 Nm (2.3 m·kgf)