USING YOUR COOKTOP
PRECISION COOKING (Cont.)
Activating a Precision Cooking Device
1. The unit must identify which device you intend to use to
adjust control parameters appropriately.
2. The display will read "Act", instructing you to activate a
device to use on the previously selected burner.
3. Activation instructions for approved devices are listed in
the table below.
Supported
Devices
How to Activate
Hestan
Cue
®
Cookware
Tap pan handle
Precision
Probe
Press side button once
NOTE: Hestan Cue
cookware can also be controlled
®
through the (SmartHQ App), but functionality is limited to
temperature control only.
Precision Cooking Control Modes
There are two control modes available:
App Control – the user interacts with an application on a smart phone.
Local Control – the user interacts with the burner to set a target temperature and no App use is required.
App Control
After activating your device on your selected burner,
open the App designed to control the selected device.
Depending on the device and application, the set
temperature may be shown in the unit display, in the App,
or hidden from view.
12
Control with this App
Hestan Cue
®
(by Hestan Smart Cooking)
SmartHQ App
Local Control
After activating your device on your selected burner, tap on
the burner ring to set the approximate temperature. Small
adjustments can be made by tapping the + or – pads.
The set temperature will be shown in the display. NOTE:
Use of App Control mode is blocked upon entering Local
Control mode.
49-2000868 Rev. 0