Publicidad
Idiomas disponibles
Idiomas disponibles
UnitiQute 2 Quick Start Guide
2 S wit chi ng O n and Get ting S t ar ted
• O nce all connections have been made, switch on UnitiQute 2 using the rear panel
power
switch. UnitiQute 2 will display a welcome screen and select its rear panel
Analogue input or, if it has been used previously, the last input selected.
Note:
If UnitiQute 2 is left unused its display will switch off after a preset time. The "Auto-off"
behaviour can be adjusted within the setup menus.
• F
or initial setup purposes UnitiQute 2 is best controlled from its remote handset. Use the up
(
) and down
(
) keys to select menu items and the ok/list key to confirm selections. To
5
6
return to a previous menu use the left
and vol+ keys.
Note:
Quickly touching the UnitiQute 2 front panel logo will mute and un-mute the speaker
and headphone outputs. Extended logo touches will alternately reduce and increase the
speaker and headphone volume.
• U
nitiQute 2 display language can be changed. Enter setup mode by pressing the setup
(
) key and select the Language option followed by the desired option. Press the ok/list
key to confirm the selection. Exit setup mode by pressing the exit or setup key.
• I f a subwoofer or external power amplifier is connected, the UnitiQute 2 preamplifier
output must be configured from the Speakers setup menu. Press the setup
select Speakers followed by Type. Select Large if a subwoofer is used to augment the
performance of full range speakers or an external power amplifier is connected. Select
Small
if a subwoofer is used with limited bandwidth satellite speakers. Exit setup mode
by pressing the exit or setup key. See the Reference Manual for more information on
speaker and subwoofer setup options.
• U nitiQute 2 is configured when shipped to connect to wired TCP/IP networks
automatically. However, if your UnitiQute 2 has been previously used and its network
configuration altered, or your network router requires non-standard settings, it may not be
able to do so. Refer to the Reference Manual or contact your retailer if this appears to
be the case.
• I f UnitiQute 2 is to use a wireless network connection it is likely that configuration will
be required. Enter setup mode by pressing the setup
Wireless and select the desired wireless network name at the following menu. If the
wireless network is protected you will be prompted at the following screen to enter the
pass-phrase or access key. Use the numeric/text keys to enter the pass-phrase or access
key taking care to ensure that the letter case is correct. Refer to the Reference Manual
for more information.
3 S electin g I np uts
• U
nitiQute 2 inputs can be selected using the up
selection keys.
• P
ressing one of the input
a group of inputs. For example, pressing the CD
pressing the
radio key scrolls through a group comprising the FM, DAB
selection key assignments are described in the Reference Manual. They
The default input
can be modified via the Inputs setup menu. Press the setup
Buttons option to modify input key assignments.
Full UnitiQute 2 installation and operational information can be found in the Reference Manual
(
3
) key. To adjust UnitiQute 2 volume use the vol–
and
selection keys either selects a single input or scrolls through
key selects the Analogue input, while
available on line at www.naimaudio.com
key and
key and select Network. Select
down keys or one of the input
and iRadio inputs.
key and select the
Note:
The n-Stream app,
available from the iTunes App
Store, enables wireless touch
screen control of UnitiQute 2
from an iPad, iPhone or iPod
touch.
Setup
4Language
Inputs
Speakers
Headphones
Language
4English
Deutsch
Français
Español
Speakers
4Type:
Loudness
Max. Volume:
Balance:
Network Settings
Name:
4Wireless:
Status:
DHCP
Select Network
<Don't Use Wireless>
LingNet
4GreenNet
TomNet
Setup
Network Settings
Digital Output
Front Display
4Handset Buttons
Inputs On:Radio
41. FM
Handset
2. DAB
3. iRadio
4. Unassigned
English
1/9
1/7
1/4
Large
No
100
0
2/5
Qute-ED68
None
Connected
Yes
3/6
8/9
1/4
Publicidad
