Pinnacle Studio Deluxe Guía De Instalación Rápida página 12

&RQQHFWLQJWKHEOXH%2;
Via the blueBOX you can connect your analog video devices or an external
monitor to your AVDV board. Connect the blueBOX to the AVDV board
directly via the cable of the blueBOX.
blueBOX Out
blueBOX-Cabel
&RQQHFWLQJWKH$XGLRORRSWKURXJK
For audio monitoring using your PC speakers, connect the Audio Output on the
back of the AVDV board to the Audio Line-IN of your sound board using the
Audio loop-through cable included in the package.
&RQQHFWLQJWKH9LGHR'HYLFHV
In the following, the options for cabling your video source—referred to as the
player—are described. The player provides the video and audio signals that
you want to digitize ("capture") to your hard disk and then edit on your PC.
Subsequently, connections to the recorder are explained. The recorder is the
device—typically a VCR—that you would like to output your final production
to.
Player: DV device
Devices that connect to the board include any DV or Digital 8 format video
camcorder or recorder that has an IEEE-1394/DV connector. On many devices,
this connector is labeled "i.Link".
To connect your DV camcorder/VCR to the STUDIO
DELUXE, use the IEEE-1394 DV cable included in the
package.
1. Connect the IEEE-1394 cable to the Pinnacle
AVDV.
Connect the 6-pin connector of the IEEE 1394 DV cable to one of the 1394
data ports of your AVDV.
Studio Deluxe
10
AVDV Board
¾ D-Sub26-Connector