Pinnacle Studio Deluxe Guía De Instalación Rápida página 19

3. Click on Start > Programs > Accessories > System Tools >
ScanDisk.
4. Make sure Thorough is checked, and click Start (this may take
awhile).
5. After scandisk is done, Click on Start > Programs > Accessories
> System Tools > Disk Defragmenter (this may take awhile).
6. Turn off Energy-saving features (point your mouse on your
desktop, right click, and select Properties > Screensaver > (under
Energy... Settings). Make sure everything under Settings for...
power schemes is set to Never.
7. Go to Start > Settings > Control Panel > System. Click on the
Performance tab, then File System, then the Troubleshooting tab.
8. Click to the left of Disable write-behind caching for all drives
option to select it, and click OK.
9. Under the hard-disk tab, set the Read-ahead optimization option
to None.
In general, this will result in an increase in the data transfer rate.
CAUTION: In some hard disks, this can result in a decrease in the write
rate!
General Note: Video Editing programs do not multi-task very well. Do not use
any other program while Making Movie (videotape or CD) or Capturing.
Enabling DMA for your Hard disk
DMA is an abbreviation of direct memory access, a technique for transferring
data from main memory to a device without passing it through the CPU.
Enabling DMA for a hard drive can significantly improve data transfer rates
and improve system performance.
Under the Windows 2000 and XP operating systems DMA is enabled by
default. This is not the case with Windows 98 / Millennium edition.
Quick Install Guide
17