en
CAUTION!
Ground conductor in PIN 13 only!
4. plus of the supporter cable (2) and insert in
this slot the switch plus of the ATC cable (4).
5. Connect directly the permanent plus of the
supporter cable (2) with the permanent plus
of the ATC cable (3).
Thus the permanent plus is carried from
the towing vehicle to the junction box via
the ATC.
6. In order to secure the functioning of the ATC,
safeguard a correct electrical power supply
(12V) of the towing vehicle.
7. Check the connection:
a) Plug in trailer cable.
b) Check ATC LED - lights up green: ok.
c) Checkthe function of the electric consu-
mers in the caravan.
2
1
PIN 9
PIN 13
1
Supporter cable, ground
2
Supporter cable, permanent
plus
3
ATC-cable, permanent plus
4
ATC-cable, switch plus
5
ATC-cable, ground
12
3
4
5
ATC
-
+
+
orange
+
violett
-
weiß
Should the distribution box be loca-
ted in the caravan, the cable must be
fed through the caravan floor. See ca-
ravan/trailer manufacturer's instructions
for use.
REPAIR WORK
CAUTION!
Repair work may only be carried out by
competent specialist workshops or our
AL-KO Service Centres.
If repairs are necessary, an extensive net-
work of AL-KO Service Centres is available
for our customers across Europe.
Contact us directly to request a list of AL-KO
Service Centres: www.al-ko.com
DISPOSAL
Do not dispose of worn-out machines
or spent batteries (including recharge-
able batteries) in domestic waste!
The packaging, machine and accessories
are made from recyclable materials and
must be disposed of accordingly.
Repair work
AL-KO ATC