Setup; Check The Supplied Items; Setup 1: Connect The Video Signal Cables - Sony SDM-P246W Manual Del Usuario

Setup

Before using your monitor, check that the following items are
included in your carton:

Check the supplied items

• LCD display
• Power cord
• HD15-HD15 video signal cable (analog RGB)
• DVI-D video signal cable (digital RGB)
• USB cable
• CD-ROM (utility software for Windows/Macintosh, Operating
Instructions, etc.)
• Warranty card
• Quick Setup Guide
Setup 1: Connect the video signal
cables
• Turn off the monitor and computer before connecting
them.
Notes
• Do not touch the pins of the video signal cable connector as this
might bend the pins.
• Check the alignment of the connector to avoid bending the pins of
the video signal cable connector.
Remove the back cover
Back cover
Connect between the monitor and the video
signal cable connector
Connect a computer equipped with a DVI output
connector (digital RGB)
Using the supplied DVI-D video signal cable (digital RGB), connect the
computer to the monitor's DVI-D input connector (digital RGB) for
INPUT1 or INPUT2.
to the computer's DVI
output connector
(digital RGB)
Connect a computer equipped with an HD15
output connector (analog RGB)
Using the supplied HD15-HD15 video signal cable (analog RGB),
connect the computer to the monitor's HD15 input connector (analog
RGB) for INPUT3.
When connecting a Macintosh computer, use an adapter (not supplied),
if necessary. Connect the adapter to the computer before connecting the
video signal cable.
to the computer's
HD15 output connector
(analog RGB)
8
(GB)
to the DVI-D input
connector
(digital RGB)
DVI-D video signal cable
(digital RGB) (supplied)
to the HD15 input
connector
(analog RGB)
HD15-HD15 video signal
cable (analog RGB)
(supplied)