be added to restore the socket fit.
PRECAUTION: If feedback indicates any of the above conditions are not
met, the socket will need to be adjusted or remade accordingly.
Liner Care
Wash and clean liner daily on both sides following use. Remove the liner,
turn the liner inside out and wash with a pH balanced, 100% fragrance-
and dye-free soap.
PRECAUTION: Do not use fabric softeners, bleaches and other products/
cleaning solutions. Using these may result in liner damage.
Rinse the liner thoroughly with water after cleaning and wipe both sides
dry. The liner can be used directly after washing. It does not need to dry
overnight.
Always return the liner to its normal state with the distal attachment
facing outwards directly after cleaning. Always check for damage or wear.
Any damage may weaken the effectiveness of the liner and should be
reported to the user's prosthetist immediately. Misuse may result in
potential loss of suspension.
Skin Care
Wash and clean residual limb daily. Wash with a mild liquid, pH balanced,
100% fragrance and dye-free soap. If dry skin is noted, apply a pH
balanced, 100% fragrance- and dye-free lotion to nourish and soften the
skin.
PRECAUTION:
– Do not apply lotion to the residual limb immediately prior to
donning the liner. To prevent damage to the liner, the residual limb
should be clean and dry.
– Inspect the residual limb and skin each day. Make sure the two are
healthy and continued use of the liner is safe.
– Do not use common household or bath products, including
soaps, deodorants, perfumes, aerosol or abrasive cleaners. These
can cause or contribute to skin irritation.
COMPLIANCE
Össur products and components are designed and tested according to
the applicable official standards or an in-house defined standard when
no official standard applies. Compatibility and compliance with these
standards are only achieved if Össur products are used with other
recommended Össur components.
We recommend carrying out regular yearly safety checks.
DISPOSAL
Return to practitioner for disposal.
All components of the product and packaging should be disposed of in
accordance with respective national environmental regulations. Users
should contact their local governmental office for information on how
these items can be disposed of in an environmentally sound manner.
10