Freeze Protection - Acova Z22050 Manual Del Usuario

English
Operating the electronic control.
1 Mode selector
2 Temperature adjustment knob
3 Status indicator lamp
4 Lockable protective cover (*)
5 Cover locking screw (*)
6 Ventilation inlets
7 Drilling mark
* depending on model.
Selecting the operating mode.
Turn the selector (1) to one of the 5 possible
operating modes.
Auto
14
Pilot wire
Off
Comfort
Eco

Freeze protection

Off position
The radiator does not heat up. The status indicator lamp
(3) will be unlit.
Comfort position
This is your radiator's normal operating mode.
You can select the room temperature using the
adjustment knob (2).
Setting the temperature:
1 Turn the adjustment knob (2) to position 8 to
start your radiator heating up. The status indicator lamp (3) will be lit red.
2 When the desired ambient temperature is reached,
turn the knob (2) left until the status lamp turns green.
3 After a few hours in operation, you can fine-tune the
temperature setting. Turn the knob right (clockwise) to increase, or left to decrease.
In this way you can achieve perfect comfort.
Eco position
This is the "Economy" position intended for nighttime use; the
temperature setting selected for the comfort position is automatically
reduced by around 3.5°C.
Freeze protection position
Your radiator is set to ensure a
minimum temperature of 7°C in your room, to prevent
any risk of frost.
Pilot wire position
Auto
If you have connected the black wire to a programming unit,
you can control it as per the table below:
English
15