EGO PTX5100 Manual Del Usuario página 14

Elevation Angle Adjustment
Except for the storage position, there
are 6 elevation angle working positions.
The blade can be adjusted to any of 6
positions, from -67.5° to +42° (Fig. 2).
1. Pull back the front sleeve, then hold
the motor cover to rotate the blade
to the desired cutting position.
2. Once the desired position reached,
release the sleeve. The sleeve bouncing back to its original position indicates that
the blade has been locked in the selected working position.
Side Angle Adjustment
There are two side working positions
(Fig. 3). The blade can be adjusted to the
left or right 90°.
1. Pull back the rear sleeve, then hold
the motor cover to rotate the blade
to the desired cutting position.
2. Once the desired position reached,
release the sleeve. The sleeve
bouncing back to its original position indicates that the blade has been locked in
the selected working position.
WARNING:
adjustments and make adjustments only when the blades are at a standstill. Never
touch the blades while making adjustments.
14
HEDGE TRIMMER ATTACHMENT — PTX5100/PTX5100-FC
To reduce the risk of injury, remove the battery before making
2
42°
19.5°
0°
-22.5°
-45°
-67.5°
3
-90°
Front Sleeve
-178°
-178
°
Storage Position
Rear Sleeve
-178
°
Rear Sleeve
0° 90°