EGO PTX5100 Manual Del Usuario página 20

Overhead Cutting (with blade at an
angle)
Hold the hedge trimmer vertically
and slowly swing it in an arc to make
maximum use of its reach (Fig. 10a
& 10b). For extreme high hedge, the
extension pole is suitable for aids in
trimming.
WARNING:
position is tiring. To minimize the risk of
accidents, work in such positions for short
periods only. Set the angle of the blade
to maximum so that the tool can be held
in a lower, less tiring position while still
providing adequate reach.
TO START/STOP THE TOOL
See "STARTING/STOPPING THE TELESCOPIC POWER POLE" section in the telescopic
power pole PPX1000/PPX1000-FC operator's manual.
20
HEDGE TRIMMER ATTACHMENT — PTX5100/PTX5100-FC
Any overhead working
10a
10b