Maintenance; General Maintenance; Replacing The Blade - EGO PTX5100 Manual Del Usuario

MAINTENANCE

WARNING:
any other parts may create a hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified service technician.
WARNING:
power pole before inspecting, cleaning, performing maintenance or changing add-on
attachments.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
water or other liquids.
CLEANING
◾
Use a soft brush to remove debris from all air intakes and cutting blades.
◾
To remove pitch and other sticky residue, spray the blades with resin solvent. Run
the motor briefly so that the solvent is evenly distributed.
◾
Do not use any strong detergents on the plastic housing or the handle. They can
be damaged by certain aromatic oils, such as pine and lemon, and by solvents
such as kerosene. Moisture can also cause a shock hazard. Wipe off any moisture
with a soft dry cloth. NEVER use water for cleaning the tool.
All hedge trimmer service, other than the items listed in these maintenance
instructions, should be performed by competent hedge trimmer service personnel.

REPLACING THE BLADE

WARNING:
very sharp and may contain burrs.
1. Switch off the tool and remove the battery pack.
When servicing, use only EGO genuine replacement parts. Use of
To prevent serious personal injury, remove the battery pack from the
When cleaning the hedge trimmer attachment, DO NOT immerse it in
Always wear gloves when handling the blade; these components are
HEDGE TRIMMER ATTACHMENT — PTX5100/PTX5100-FC
21